B-31HR Camshaft 2500-6500 Range
B-31HR Camshaft works with stock OEM pistons with 1.6 roller rockers. RPM range 2500-6500.
S/C 10-20lb 302-331 c.i.d. Best for 6200-6500 rpm. Great with TFS or Edelbrock heads Minimum 42lb injectors and 80mm mass air. Recommended 3.73 to 4.10 gears, good drivability down to 2100 rpm, mild idle, rpm range 2500-6500, needs 2700-2900 converter.
Must have Anderson H-Rev valve springs
Read Tech Article
Example of usings B-31HR camshaft
Anderson Quick Kit I & Quick Kit II on stock 93 short Block, Stg II Anderson/Vortech SQ-Trim Kit and with B-31hr camshaft
Stock short block with Twisted Wedge heads and Hi-Rev valve springs, B-31HR camshaft Holley SystemMax intake, DBX Mass air meter, PMS, and G-Turbo 73mm turbo kit
B-31HR Camshaft works with stock OEM pistons with 1.6 roller rockers. RPM range 2500-6500.
S/C 10-20lb 302-331 c.i.d. Best for 6200-6500 rpm. Great with TFS or Edelbrock heads Minimum 42lb injectors and 80mm mass air. Recommended 3.73 to 4.10 gears, good drivability down to 2100 rpm, mild idle, rpm range 2500-6500, needs 2700-2900 converter.
Must have Anderson H-Rev valve springs
Read Tech Article
Example of usings B-31HR camshaft
Anderson Quick Kit I & Quick Kit II on stock 93 short Block, Stg II Anderson/Vortech SQ-Trim Kit and with B-31hr camshaft
Stock short block with Twisted Wedge heads and Hi-Rev valve springs, B-31HR camshaft Holley SystemMax intake, DBX Mass air meter, PMS, and G-Turbo 73mm turbo kit
Send Enquiry to sale@makemyecommerce.com or call us : +91 7890 222 444
5.4L 4V PERFORMANCE INTERCOOLER
Here is an excellent upgrade for 2007-2012 Mustang GT500 and 5.4L Cobra Jet Mustangs. This For..
$52,500.00 Ex Tax: $52,500.00
Anderson/EFI Hurricane Intake Manifold Kit. Fits 351W
Anderson / EFI Hurricane Intake Manifold Kit, up to 7000 rpm for 351W blocksThe Anderson/ EFI Hurric..
$49,738.80 Ex Tax: $49,738.80
Anderson Titanium Retainer. Fits 4.6L 2V
Anderson Hi-rev Valve Springs for 2V P.I. heads Anderson Hi-rev Valve Springs for 2V P...
$9,119.40 Ex Tax: $9,119.40
Edelbrock Belt Tensioner Brace. Fits 06-09 Mustang GT
Edelbrock BELT TENSIONER BRACE for 06-09 Mustang GT This new belt tensioner brace is intended for us..
$2,163.00 Ex Tax: $2,163.00
Fidanza Adjustable Driver Side Cam Gear with Trigger
These are GREAT new cam sprockets design especially for the 4.6. They allow you to set your cam timi..
$8,999.40 Ex Tax: $8,999.40
Kooks Catted X-Pipe 3andquot; Metallic Stainless. Fits 07-10 GT500
Kooks Stainless 3" Metallic Catted X-Pipe for Kooks Full length Headers on 07-10 GT5003" stainless c..
$33,434.40 Ex Tax: $33,434.40
N-21 Camshaft 2600-6200 Range
N-21 Camshaft works with stock OEM pistons with 1.7 Roller rockers. RPM range 2600-6200.Same as N-4..
$19,140.00 Ex Tax: $19,140.00
Quick Time Non-SFI Bell Housing. Fits 4.6/5.4L Mustang
Quick Time NON-SFI Bell Housing for 4.6/5.4 MustangQuickTime has set a new standard for steel bellho..
$34,200.00 Ex Tax: $34,200.00
Steeda Caster/Camber Plates Aluminum. Fits 94-04 Mustang
Steeda New Billet Aluminum 4-Bolt Caster Camber Plates for 94-04 MustangStrength & Durability:* 4 bo..
$14,997.00 Ex Tax: $14,997.00